EASY
Designed For DIY
Every harness and kit is engineered for simplicity, making installation easier than ever. In addition to that, we pre-wire and pre-assemble every part that we can before shipping it out to you!
Reliable
All Harnesses and kits are USA made
We source the highest quality components for every single part of our kits. From the fuses and cables to the brackets and hardware, not a single corner is cut.
Blaze Off-Road PowerSwitch Kits
All Blaze Off-Road Garmin kits come with everything you need to get up and running in minutes, not hours. From fuses and cables to brackets and hardware, you'll be ready to plug and play in under 30 minutes!
Shop Garmin Kits
Garmin PowerSwitch
With six 30-amp outputs, compact design, and an abundance of control options, the Garmin PowerSwitch is a beast of a modern switching system.
Blue Sea Systems Fuse Block
For all of your constant power needs, this fuse block keeps your systems up and running safely and reliably.
Perfect for your fridge/ freezer, USB ports, Starlink, solar charger, inverter, or any other constant power need!
Blue Sea Systems Ground Bar
We use only the highest quality electrical components on the market, ensuring a lifetime of corrosion-free reliability.
USA Made Battery Cables
Built in-house from the highest quality cable, sheathing, heatshrink, and terminals available on the market, these cables are built to last through even the harshest of engine bay conditions.
Marine-Rated Battery Fuse
Keep your electrical system and vehicle safe with these high-quality terminal fuses.
Your wiring is a mess. We can help.
Using the cheap harnesses that come with your lights is never a good idea, especially if you are using a switching system. You have to cut, splice, and crimp on an already sub-par foundation.
Blaze Off-Road wiring harnesses are purpose-built for your specific vehicle, switching system, and lights. This makes installation easier, cleaner, and more reliable than ever.
Have a question? We are here to help!
Check out the most common questions our customers asked. Still have questions? Contact our customer support.
How do I know which kit to buy?
Easy! Every Garmin kit is based on the vehicle, and in some cases, like the 5th-gen 4-Runner, the number of PowerSwitch units you would like to run!
Simply shop by your vehicle, making sure to select the correct model and year. Then if we make a PowerSwitch for your application, it will show up.
If you are still unsure, shoot us a message, we are always happy to help!
I DO NOT understand wiring and electrical... Can I even do this?
Yes, you 100% can! That is why Blaze Off-Road exists. All of our kits are engineered specifically for the DIY guys who have no electrical experience and no special tools.
The vast majority of our customers tell us that they do not know the first thing about wiring, and that our kit was one of the easiest things they have installed on their rigs!
What connectors do I need on my harness?
If you need help identifying your connector please see the last photo in the product photos shown, or reach out to us!
Common Connectors:
Baja Designs Weather Pack 2-pin:
- S1 Pods
- S2 Pods
- Squadron Pods
Baja Designs Weather Pack 3-pin:
- XL Pods
- S8 Lightbars
- OnX6 Lightbars
DT 2-Pin Connectors:
- Morimoto Pods
- Diode Dynamics Stage Series Light Bars
- Diode Dynamics Non-Backlit Pods (older)
- Rigid Non-Backlit Pods
DT 3-Pin Connectors:
- KC Backlit Pods
DT 4-Pin Connectors:
- Baja Designs LP Series Lights
- Diode Dynamics Backlit Pods
- Diode Dynamics New Generation Light bar
- Diode Dynamics SS5 Sport Light bar
DTP Connectors are another common connector for higher amperage bars such as the Diode Dynamics SS5 pro bar. If your connector resembles a DT series connector but is larger, this may be DTP. Reach out to us for a custom harness with this connector and we can still get you taken care of!
*This list is not comprehensive, and we cannot live track changes made by manufactures on their connector type, if you are unsure of your connector type please send us an email!*
Do I need any special wiring tools?
If you are wiring the harness to a switching system or terminal block setup, no, you do not need any more than a Phillips head screwdriver in the vast majority of cases!
I'm not comfortable cutting and splicing wires, is that okay?
Yes! Our harnesses arrive 100% ready to plug and play. Simply plug the connectors into the lights, route the wires, and then connect the ring terminals to your switching system!
What is the Garmin PowerSwitch?
Easy! The Garmin powerSwitch is a modern, MOSFET-based intelligent switching system. Long story short, this means it is super simple, super easy to use, and incredibly reliable. No old school fuses and relays needed, no mechanical parts to break and plenty of power!
Learn more here.