Light Array One Piece Harness

$350.00

Number of Lights
Zone Type

If you are in need of some serious light, that also looks killer on your rig, you will for sure want to throw a sweet stack of pods up on that roof rack, or all the way across that front bumper of yours. 

Some things to keep in mind: You will need to do the math on the total amperage of your lights as compared to the maximum output of your switching system. Most light arrays draw so much power that we will need to either add a TE relay and control harness for that as well, or we will need to simply break the lights up into two different zones. 

The harness will include a backlighting feature if your lights offer it. LP series harnesses WILL NOT offer the low beam feature. If you accidentally turn on both low and high beams at the same time it will fry the LP lights from Baja Designs. Being that so few people have real reasons for using the low beam on trucks we do not offer the feature. 

If you would like to wire your lights up on one circuit we can provide a TE Relay (see photos) for you to mount. This kit will also come with the control wire needed for this relay to connect to your switching system. 

For routing your harness we highly recommend the Baja Designs Wire Hider Kit.
PLEASE ENTER THE LIGHT TYPE AND PATTERN YOU WOULD LIKE THE TWO ZONES WIRED IN THE COMMENT SECTION AT CHECKOUT. IF YOU WOULD LIKE TO EMAIL A PHOTO OF YOUR LIGHTS TO SALES@BLAZEOFFROAD.COM WITH YOUR ORDER NUMBER THAT WOULD BE ACCEPTABLE AS WELL. 
 

Harnesses are made to order and will have a 3-5 week lead time. 

Roof Rack Light Array One Piece Harness - Blaze Off-Road
Blaze Off-Road

Light Array One Piece Harness

From $200.00

If you are in need of some serious light, that also looks killer on your rig, you will for sure want to throw a sweet stack of pods up on that roof rack, or all the way across that front bumper of yours. 

Some things to keep in mind: You will need to do the math on the total amperage of your lights as compared to the maximum output of your switching system. Most light arrays draw so much power that we will need to either add a TE relay and control harness for that as well, or we will need to simply break the lights up into two different zones. 

The harness will include a backlighting feature if your lights offer it. LP series harnesses WILL NOT offer the low beam feature. If you accidentally turn on both low and high beams at the same time it will fry the LP lights from Baja Designs. Being that so few people have real reasons for using the low beam on trucks we do not offer the feature. 

If you would like to wire your lights up on one circuit we can provide a TE Relay (see photos) for you to mount. This kit will also come with the control wire needed for this relay to connect to your switching system. 

For routing your harness we highly recommend the Baja Designs Wire Hider Kit.
PLEASE ENTER THE LIGHT TYPE AND PATTERN YOU WOULD LIKE THE TWO ZONES WIRED IN THE COMMENT SECTION AT CHECKOUT. IF YOU WOULD LIKE TO EMAIL A PHOTO OF YOUR LIGHTS TO SALES@BLAZEOFFROAD.COM WITH YOUR ORDER NUMBER THAT WOULD BE ACCEPTABLE AS WELL. 
 

Harnesses are made to order and will have a 3-5 week lead time. 

Number of Lights

  • Four
  • Five
  • Six
  • Seven
  • Eight
  • Nine
  • Ten
  • Eleven
  • Twelve
  • 0

Zone Type

  • One Zone - All Wired Together
  • One Zone - All Wired Together - Include Relay Kit
  • Two Zones - Alternating Lights
  • Two Zones - Outside/Inside
  • Relay Kit only - Includes fuse, power cable, control harness, and relay.
View product