5th Gen 4-Runner Cornerstone Kit - Dual PowerSwitch

Ready to roll, plug-and-play Toyota 4-Runner Dual or Tripple Garmin PowerSwitch kit.

 This kit is designed to run two or three Garmin PowerSwitch units, in slightly different configurations. This kit is optimized to run as a dual kit and works around the included Blue Sea Systems Safety Hub 150. This allows you to easily power or run any system on your vehicle, from solar input, and Redarc dual battery systems to all of your switching needs for lighting, compressors, lockers, etc. 

Backlighting Buss Bar:

Many lighting brands now offer backlighting, and it is a killer option to provide some great-looking accent lighting on your offroad rig. The main problem with wiring these systems is that you end up with four, five, or six wires needing a place to go, or you need to use up half of your switches just to power the backlights. That is why we added a Blue Sea Systems buss bar to act as your backlighting bar. Simply run power to this bar from one of the switched outputs on the garmin, and connect all of your backlighting here. Easy! 

Dual Battery Ready: 

When you buy the Dual Garmin Kit from us, the included Blue Sea Systems Safety Hub 150 is PERFECT for connecting your Redarc BCDC, or other smart charger. This will act as your fused connection to your primary, or secondary battery (based on where the system is wired to). Pair this with our BCDC mount, and you have an easy-to-install solution to knock out your dual battery system! 

This kit is available in Three configurations. 

• Dual Kit - No PowerSwitch Units
• REQUIRES SDHQ TERMINALS
• NO PowerSwitch Units
• One Blue Sea Saftey Hub 150
• One 10 Screw Ground Bar
• One 5 Screw Buss Bar For Backlighting or Extra Grounds
• Bracket Kit
• Hardware
• Terminal Fuses
• Fuses for SH150 to PowerSwitch Units
• All needed Cables (x6 cables total)

• Dual Kit - Complete
• REQUIRES SDHQ TERMINALS
• Two PowerSwitch Units
• One Blue Sea Saftey Hub 150
• One 10 Screw Ground Bar
• One 5 Screw Buss Bar For Backlighting or Extra Ground
• Bracket Kit
• Hardware
• Terminal Fuses
• Fuses for SH150 -> PowerSwitch Units
• All needed Cables (x6 cables total)

• Triple Kit - Complete
• REQUIRES SDHQ TERMINALS
• Three PowerSwitch Units
• No Fuse Block
• Two 10 Screw Ground Bars
• One 5 Screw Buss Bar For Backlighting or Extra Grounds
• Bracket Kit
• Hardware
• Terminal Fuses
• All needed Cables (x6 cables total)

We HIGHLY recommend the SDHQ terminals with BOTH kits.

It is very popular to control the Garmin PowerSwitch with one of the Garmin Tread Tablets as well. Check out those units here: 

• Garmin Tread Overland Edition
• Garmin Tread XL Overland Edition

2019+ 4Runners will need the factory relay mount bracket modified or relocated. We do this in the shop with tin-snips in less than 60 seconds. See that video HERE. Skip to 10:15 to see bracket removal and modification.   

Upgraded Cables are now included with every kit. All of our cables are made of only the highest quality American-made wire. With this upgrade, we will build the cables with a TechFlex abrasion and heat-resistant braided sheathing to make sure that our dual wall-insulated battery cables truly last the life of the vehicle. When you have your rig wired at Blaze Off-Road we won't do it any other way than with our upgraded cables, and that's why we include them with every kit now.

Post Mount Fused is now included with every kit. 

This system is now in production and has a 4-8 week lead time.