Blaze Off-Road  |  SKU: 03040501

Toyota Garmin PowerSwitch Ready To Run Kit

$139.99

Kit

Ready to roll, plug and play Toyota 4-Runner, Tacoma and Lexus GX470, Lexus GX460 Garmin PowerSwitch Kit.

*This Garmin PowerSwitch Kit will work on 2019+ 4-runners and GX vehicles with a very slight modification (cut or bend) to a factory bracket. This can be done with a grinder or sheet metal shears.

*Please note, these Toyota Garmin PowerSwitch kits may take 6-8 weeks to ship due to inventory lead times and sourcing issues on Blue Sea Systems components. If you need it sooner please reach out to verify the current lead time. We are working daily to get every order out as soon as parts are in! 

Included in the complete kit and kit without PowerSwitch Options:

  • Garmin PowerSwitch unit (if full kit is selected)
  • Blaze Off-Road vehicle-specific Garmin PowerSwitch mount bracket
  • Blaze Off-Road vehicle-specific battery cables (x3)
  • Blue Sea Systems 2314 ground bar
  • Blue Sea Systems 5045 4 fuse block
  • Post Mount Fuse Set-up (terminal fuse mount, hardware, cover, and both needed fuses)
  • All Hardware needed

Included in the Bracket and hardware-only kit:

  • Vehicle Specific Garmin PowerSwitch Bracket
  • Hardware

Not Included but may be shown in photos:

  • Garmin Tablet/ Navigator
  • Cell Phone for control
  • Electrical accessories not listed above
  • Other Garmin Products
  • Dirt…Unless you request it…I guess.

 

Upgraded Cables - Does not come in bracket-only kit.

All our cables are made of only the highest quality American-made wire. With this upgrade, we will build the cables with a TechFlex abrasion and heat-resistant braided sheathing to ensure that our dual wall-insulated battery cables truly last the vehicle's life.

 

If you have hood struts you will need spacers to space the bracket away from them. 

 


The all-new Garmin PowerSwitch.

Compact, powerful, expandable, and a beast of a switching system.

The Quick & Dirty.

  • Wirelessly connect and control up to 4 of these powerful little units.
  • Small enough to mount anywhere and everywhere.
  • 6x 30 amp circuits per unit.
  • 2x trigger inputs per unit.
  • Control with your phone, tablet, CarPlay/Android Auto, physical input switches or compatible Garmin navigation units.
  • No need to run any wires through your firewall.

Our View - As Professionals.

These units are incredibly robust. With six 30A circuits per unit and full wireless control, these IPX7 MOSFET-based Garmin PowerSwitch modules are perfect for virtually every application.

We believe that the Garmin PowerSwitch units work great for side x sides, overlanding vehicles, crawlers, and of course your everyday weekend warrior that simply needs to gain some control over their much-needed accessories on the vehicle.

One thing commonly looked over on the Garmin PowerSwitch is the "control" inputs. We often use these as inputs from factory or aftermarket switches like up fitters or toggles. We like programing modes such as "Trail" or "Camp" modes. In "Trail" mode we tend to turn on all of the front facing lights while strobing the rear lights. In "Camp" mode we like to turn on all back lighting, rock lights, and scene lighting to provide a good coverage of ambient lighting for camp.  

If you want a robust, rugged, expandable, programable, and incredibly capable unit the Garmin PowerSwitch is for you.

INSTALL MADE SIMPLE

The hassle-free installation lets you connect up to six accessories to one Garmin PowerSwitch box. There’s no interference with your vehicle electronics and no need to cut holes in your dashboard or route wires through the firewall.

THE APP

Use the Garmin PowerSwitch app on your compatible Garmin navigator or smartphone to control all your accessories from your touchscreen device.

WIRELESS SWITCH CONTROL

The Garmin PowerSwitch digital switch box uses BLUETOOTH® wireless connectivity to program and operates your accessories from compatible Garmin navigators or smartphones.

MORE CONTROL

Control up to four of your Garmin PowerSwitch devices from your compatible1 Garmin navigator or smartphone.

AMPLE OUTLETS

With a total of six circuits rated at up to 30 amps each, you can power and control all types of 12-volt accessories from one Garmin PowerSwitch digital switch box.

CONTROL INPUTS

Includes two control inputs that detect a signal from 3.3-volt to 18-volt that can be used to turn on the customizable outputs. For example, you can connect your vehicle ignition switch to a control input terminal to turn on accessories automatically each time you start your vehicle.

LIGHT IT UP

The Garmin PowerSwitch system makes it easy to add all types of exterior lighting packages to your vehicle — everything from light bars and fog lights to emergency flashers and rear and rock lights.

POWER YOUR ADVENTURES

In addition to vehicle lights, you can tap into Garmin Power Switch with all types of useful gear: Com radios, refrigerators, air compressors or virtually anything that can run with 12-volt power.

Customer Reviews

Based on 15 reviews
100%
(15)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
“AL Nino”
Best Upgrade!!!

Awesome product!!! Got it all hooked up in a little over an hour because I also had to get all the old wirings out, install was very easy and looked so clean. Everything worked flawlessly. Mitchell’s video install was very helpful. Glad I went with Garmin. If you want a nice clean look and easy to install get this you won’t be disappointed. Blaze Off-road customer service was awesome.

r
ricardo

Easy install and made here

R
Ryan Ito
2007 4Runner Hack

Picked up only the bracket and the battery terminal upgrade. Used a 1”x1” aluminum square tube to give the strut enough room to close the hood. If not, it will contact the connectors on the drivers side of the power switch. Worked perfectly!

K
Kai Larsen
Immensely satisfied!! Best customer service ever

I recently got a lightbar for my 4Runner and knew I needed some upgraded wiring and a way to trigger it. I’ve seen a lot of people recommending the Garmin PowerSwitch and the Ready to Run kit from Blaze Off-Road. So I emailed them to see what their shipping times were. As coincidentally I was leaving in a week to start a 15k mile roadtrip for the summer. It showed up just as quickly as they said and I had plenty of time to install it. The one thing I didn’t think about was how to get my wiring harness from the lighting company attached so I sent Mitchel a message asking what the heck to do (I’m a complete amateur with wiring/power. Blaze Off-Road responded quickly and was happy to help even though it wasn’t their issue. After explaining to me what I needed to do I still wasn’t sure how to do it and honestly didn’t have the time and tools. Instead I ended up ordering a plug n play harness from Blaze to replace my trashy/confusing wiring harness. And Mitchel even let me stop by the shop in Colorado and installed it for me in less than 5 minutes on my way through the state. That way we could get back on the road…. Needless to say if you read this whole thing I highly recommend purchasing from Blaze Off-Road. The customer service is one of a kind and we need more companies like this especially in the automotive/offroad industry. The product was super easy to install and they have good videos on their YouTube to walk you through it. Email responses are very quick and timely. Worth EVERY penny. I’ll be a customer for the rest of my life

B
Bryan

Absolutely amazing product. 100 times better than my old voswitch. Looks so clean.

Toyota Garmin PowerSwitch Ready To Run Kit - Blaze Off-Road
Blaze Off-Road

Toyota Garmin PowerSwitch Ready To Run Kit

From $139.99

Ready to roll, plug and play Toyota 4-Runner, Tacoma and Lexus GX470, Lexus GX460 Garmin PowerSwitch Kit.

*This Garmin PowerSwitch Kit will work on 2019+ 4-runners and GX vehicles with a very slight modification (cut or bend) to a factory bracket. This can be done with a grinder or sheet metal shears.

*Please note, these Toyota Garmin PowerSwitch kits may take 6-8 weeks to ship due to inventory lead times and sourcing issues on Blue Sea Systems components. If you need it sooner please reach out to verify the current lead time. We are working daily to get every order out as soon as parts are in! 

Included in the complete kit and kit without PowerSwitch Options:

Included in the Bracket and hardware-only kit:

Not Included but may be shown in photos:

 

Upgraded Cables - Does not come in bracket-only kit.

All our cables are made of only the highest quality American-made wire. With this upgrade, we will build the cables with a TechFlex abrasion and heat-resistant braided sheathing to ensure that our dual wall-insulated battery cables truly last the vehicle's life.

 

If you have hood struts you will need spacers to space the bracket away from them. 

 


The all-new Garmin PowerSwitch.

Compact, powerful, expandable, and a beast of a switching system.

The Quick & Dirty.

Our View - As Professionals.

These units are incredibly robust. With six 30A circuits per unit and full wireless control, these IPX7 MOSFET-based Garmin PowerSwitch modules are perfect for virtually every application.

We believe that the Garmin PowerSwitch units work great for side x sides, overlanding vehicles, crawlers, and of course your everyday weekend warrior that simply needs to gain some control over their much-needed accessories on the vehicle.

One thing commonly looked over on the Garmin PowerSwitch is the "control" inputs. We often use these as inputs from factory or aftermarket switches like up fitters or toggles. We like programing modes such as "Trail" or "Camp" modes. In "Trail" mode we tend to turn on all of the front facing lights while strobing the rear lights. In "Camp" mode we like to turn on all back lighting, rock lights, and scene lighting to provide a good coverage of ambient lighting for camp.  

If you want a robust, rugged, expandable, programable, and incredibly capable unit the Garmin PowerSwitch is for you.

INSTALL MADE SIMPLE

The hassle-free installation lets you connect up to six accessories to one Garmin PowerSwitch box. There’s no interference with your vehicle electronics and no need to cut holes in your dashboard or route wires through the firewall.

THE APP

Use the Garmin PowerSwitch app on your compatible Garmin navigator or smartphone to control all your accessories from your touchscreen device.

WIRELESS SWITCH CONTROL

The Garmin PowerSwitch digital switch box uses BLUETOOTH® wireless connectivity to program and operates your accessories from compatible Garmin navigators or smartphones.

MORE CONTROL

Control up to four of your Garmin PowerSwitch devices from your compatible1 Garmin navigator or smartphone.

AMPLE OUTLETS

With a total of six circuits rated at up to 30 amps each, you can power and control all types of 12-volt accessories from one Garmin PowerSwitch digital switch box.

CONTROL INPUTS

Includes two control inputs that detect a signal from 3.3-volt to 18-volt that can be used to turn on the customizable outputs. For example, you can connect your vehicle ignition switch to a control input terminal to turn on accessories automatically each time you start your vehicle.

LIGHT IT UP

The Garmin PowerSwitch system makes it easy to add all types of exterior lighting packages to your vehicle — everything from light bars and fog lights to emergency flashers and rear and rock lights.

POWER YOUR ADVENTURES

In addition to vehicle lights, you can tap into Garmin Power Switch with all types of useful gear: Com radios, refrigerators, air compressors or virtually anything that can run with 12-volt power.

Kit

  • Bracket & Hardware Only
  • Full Kit Without PowerSwitch
  • Full Kit & PowerSwitch
View product