1 4
Blaze Off-Road  |  SKU: TPS02

Toyota Dual Garmin PowerSwitch Ready To Run Kit

$1,333.86
Shipping calculated at checkout.
Include PowerSwitch Units

Ready to roll, plug and play Toyota 4-Runner, Tacoma and Lexus GX470 twin Garmin PowerSwitch kit.

 

You can run up to 4 Garmin PowerSwitch units on one vehicle, this kit allows you to easily install two on them under the hood of your Toyota.

Included in this kit:

Not Included but may be shown in photos:

  • Garmin Tablet/ Navigator

  • Cell Phone for control

  • Electrical accessories not listed above

  • Other Garmin Products

  • Dirt…Unless you request it…I guess.

 

 

Upgraded Cables now included with every kit. 

All of our cables are made of only the highest quality American-made wire. With this upgrade, we will build the cables with a TechFlex abrasion and heat-resistant braided sheathing to make sure that our dual wall-insulated battery cables truly last the life of the vehicle. When you have your rig wired at Blaze Off-Road we won't do it any other way than with our upgraded cables, and thats why we include them with every kit now.


Post Mount Fused now included with every kit. 


With Gen 2 Tundra install this kit does need Riv-Nuts installed and come with the kit. Please know that you need a special tool for this and need to drill into the inner fender. 


INSTALL MADE SIMPLE

Hassle-free installation lets you connect up to six accessories to one Garmin PowerSwitch box. There’s no interference with your vehicle electronics and no need to cut holes in your dashboard or route wires through the firewall.

THE APP

Use the Garmin PowerSwitch app on your compatible Garmin navigator or smartphone to control all your accessories from your touchscreen device.

WIRELESS SWITCH CONTROL

The Garmin PowerSwitch digital switch box uses BLUETOOTH® wireless connectivity to program and operate your accessories from compatible Garmin navigators or smartphones.

MORE CONTROL

Control up to four of your Garmin PowerSwitch devices from your compatible1 Garmin navigator or smartphone.

AMPLE OUTLETS

With a total of six circuits rated at up to 30 amps each, you can power and control all types of 12-volt accessories from one Garmin PowerSwitch digital switch box.

CONTROL INPUTS

Includes two control inputs that detect a signal from 3.3-volt to 18-volt that can be used to turn on the customizable outputs. For example, you can connect your vehicle ignition switch to a control input terminal to turn on accessories automatically each time you start your vehicle.

LIGHT IT UP

The Garmin PowerSwitch system makes it easy to add all types of exterior lighting packages to your vehicle — everything from light bars and fog lights to emergency flashers and rear and rock lights.

POWER YOUR ADVENTURES

In addition to vehicle lights, you can tap into Garmin PowerSwitch with all types of useful gear: Comm radios, refrigerators, air compressors or virtually anything that can run with 12-volt power.

 

Shop Toyota Tacoma/ 4-Runner, Lexus GX470 Garmin PowerSwitch Ready To Run Kit

 

*Please note, lead times may be 6-8 weeks.

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
K
Kevin Reed
Kit looks amazing

I ordered the Garmin Power Switch mounting plate and cables for Baja Design lights. Everything looks amazing and professionally made. Have additional projects planned, I will be back!

G
George Hartwell
Dual Garmin powerswitch kit

Blaze Off-roads response to an email inquiry by me told me all I need to know about this company. Not only was the response professional but it provided an updated notice of when I could expect the kits I ordered. Then when they arrived they were exceptionally packaged and the kit was unmatched in quality of electronic parts kits that I have ever used. I can’t wait to finish the install and I also can’t wait to order more things for my Tacoma from Blaze Off-Road!

C
Cyle Korver
Great Product & Experience

Mitchell was straight forward throughout the entire process. Laid out everything that would work for my setup and answered every question that I had. The harnesses used are the best I have seen and the Garmin setup is beyond user friendly and makes everything a lot less intimidating. Can't wait to add more!

Toyota Dual Garmin PowerSwitch Ready To Run Kit - Blaze Off-Road
Blaze Off-Road

Toyota Dual Garmin PowerSwitch Ready To Run Kit

From $148.00

Ready to roll, plug and play Toyota 4-Runner, Tacoma and Lexus GX470 twin Garmin PowerSwitch kit.

 

You can run up to 4 Garmin PowerSwitch units on one vehicle, this kit allows you to easily install two on them under the hood of your Toyota.

Included in this kit:

Not Included but may be shown in photos:

 

 

Upgraded Cables now included with every kit. 

All of our cables are made of only the highest quality American-made wire. With this upgrade, we will build the cables with a TechFlex abrasion and heat-resistant braided sheathing to make sure that our dual wall-insulated battery cables truly last the life of the vehicle. When you have your rig wired at Blaze Off-Road we won't do it any other way than with our upgraded cables, and thats why we include them with every kit now.


Post Mount Fused now included with every kit. 


With Gen 2 Tundra install this kit does need Riv-Nuts installed and come with the kit. Please know that you need a special tool for this and need to drill into the inner fender. 


INSTALL MADE SIMPLE

Hassle-free installation lets you connect up to six accessories to one Garmin PowerSwitch box. There’s no interference with your vehicle electronics and no need to cut holes in your dashboard or route wires through the firewall.

THE APP

Use the Garmin PowerSwitch app on your compatible Garmin navigator or smartphone to control all your accessories from your touchscreen device.

WIRELESS SWITCH CONTROL

The Garmin PowerSwitch digital switch box uses BLUETOOTH® wireless connectivity to program and operate your accessories from compatible Garmin navigators or smartphones.

MORE CONTROL

Control up to four of your Garmin PowerSwitch devices from your compatible1 Garmin navigator or smartphone.

AMPLE OUTLETS

With a total of six circuits rated at up to 30 amps each, you can power and control all types of 12-volt accessories from one Garmin PowerSwitch digital switch box.

CONTROL INPUTS

Includes two control inputs that detect a signal from 3.3-volt to 18-volt that can be used to turn on the customizable outputs. For example, you can connect your vehicle ignition switch to a control input terminal to turn on accessories automatically each time you start your vehicle.

LIGHT IT UP

The Garmin PowerSwitch system makes it easy to add all types of exterior lighting packages to your vehicle — everything from light bars and fog lights to emergency flashers and rear and rock lights.

POWER YOUR ADVENTURES

In addition to vehicle lights, you can tap into Garmin PowerSwitch with all types of useful gear: Comm radios, refrigerators, air compressors or virtually anything that can run with 12-volt power.

 

Shop Toyota Tacoma/ 4-Runner, Lexus GX470 Garmin PowerSwitch Ready To Run Kit

 

*Please note, lead times may be 6-8 weeks.

Include PowerSwitch Units

  • Yes
  • No
  • Bracket and Hardware Only
View product
Back to top