2003-2024 4Runner Garmin PowerSwitch Ready To Run Kit
2003-2024 4Runner Garmin PowerSwitch Ready To Run Kit - Bracket & Hardware Only is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Ready to roll, plug-and-play Garmin PowerSwitch Kit.
If you have a 4th or 5th Generation Toyota 4-Runner you may already know that there are a handful of switching system kits on the market, however, none are as complete or as easy to install as ours. Our kit was developed from years of doing complex electrical installs for customers. Through the years we have built, modified, and refined our kits to be as easy as possible to install while maintaining the quality and reliability demanded from Toyota owners.
Key Features:
- Works with 4th/5th gen 4-Runner, Lexus GX470, and Lexus GX460.
- EASY install. Our complete kits come pre-assembled, and ready to install. Typical customer install time is under 30 minutes.
- USA-made high-quality aluminum bracket, with USA-made stainless hardware.
- PEM nut mounting hardware, so no more dealing with installing washers and nuts on the back side of the bracket.
- High-quality Blue Sea Systems components are included with kits to ensure the longevity of your accessory components.
- Heat and abrasion-resistant, USA-made motorsports-grade battery cables
- MRBF fuses are included to remove all unfused cable that comes with inline fuse applications. This helps lower the short-to-ground related fire risk that can happen should you get in an accident, or have your battery shift offroading.
Included in the complete kit and kit without PowerSwitch Options:
- Garmin PowerSwitch unit (if full kit is selected)
- Blaze Off-Road vehicle-specific Garmin PowerSwitch mount bracket
- Blaze Off-Road vehicle-specific battery cables (x3)
- Blue Sea Systems 2314 ground bar
- Blue Sea Systems 5045 4 fuse block
- Post-Mount (MRBF) Fuse Set-up (terminal fuse mount, hardware, cover, and both needed fuses)
- All Hardware needed
Included in the Bracket and hardware-only kit:
- Vehicle-Specific Garmin PowerSwitch Bracket
- Hardware
Not Included but may be shown in photos:
- Garmin Tablet/ Navigator
- Cell Phone for control
- Electrical accessories not listed above
- Other Garmin Products
- Dirt…Unless you request it…I guess.
It is very popular to control the Garmin PowerSwitch with one of the Garmin Tread Tablets as well. Check out those units here:
- Garmin Tread Overland Edition
- Garmin Tread XL Overland Edition
The SDHQ Terminal Kit recommended for this product:
- All other vehicles SDHQ Terminal Kit
*SDHQ Terminals Required for newer 4Runners with the factory battery terminal fuse.
*If you have hood struts you will need spacers to space the bracket away from them.
*This Garmin PowerSwitch Kit will work on 2019+ 4-runners and GX vehicles with a very slight modification (cut or bend) to a factory bracket. This can be done with a grinder or sheet metal shears.
*Please note, these Toyota Garmin PowerSwitch kits may take 6-8 weeks to ship. If you need it sooner please reach out to verify the current lead time. We are working daily to get every order out as soon as parts are in!